HWV Series cyclone mill

Main use:

High reliability ultra-fine grinding equipment suitable for industries such as chemical, pharmaceutical, food, feed, pesticide, and non-metallic minerals, especially suitable for ultra-fine grinding of non-metallic mineral materials such as calcium carbonate and kaolin, including drying and surface modification treatment.

Working principle:

After the material is added from the top of the upper box, it is quickly dispersed by the pre crushing blades on the upper part of the rotor, scattered towards the four walls of the stator, and enters the crushing area composed of the rotor and stator. The large amount of air flow generated by the high-speed rotation of the rotor is not only affected by the rotating and stationary components inside the machine, but also by the appropriate guidance inside the machine, and is transformed into countless turbulent turns. These numerous air turbulence in the crushing area activate the material and accelerate it to the same speed as the air flow. Then, the direction and speed of these materials change instantly, and the particles of each material collide with each other, completing ideal cracking in high-speed airflow. Only a small portion of the particles are refined through the impact of the moving and stationary components inside the machine. During the entire residence period of material particles in the machine, they are always surrounded by air flow. Therefore, the heat inevitably generated during the ultrafine grinding process is also carried away by the air flow as the grinding medium. The above crushing principle makes HWV cyclone mill particularly suitable for grinding and drying operations.

Features:

1. By using a conical rotor and stator, the gap between the rotor and stator can be adjusted by lifting the upper box (stator) to control product fineness and output, with a gap adjustment range of 0-5mm;

2. The rotor is made of special high-strength steel imported from Europe and high hardness wear-resistant castings. The outermost linear speed of the rotor can reach over 125 meters/second, and it also has the characteristics of long service life;

3. The use of computer-aided design for the box body results in smoother discharge and lower noise, greatly reducing the phenomenon of micro powder sticking to the wall when handling sticky and cohesive materials;

4. The processing air volume is extremely large, and the temperature rise during crushing is low, especially suitable for thermoplastic and fibrous materials, with uniform product particle size;

5. Optional fan blades can be installed under the rotor to increase air flow rate;

6. Easy maintenance, operation, and cleaning.